Lihlahisoa
Boima ba ho phahamisa matla a motlakase a le mong oa girder ka holim'a lifeme
tlhaloso
The electric single girder overhead crane ke karolo ea bohlokoa ea thepa tšimong ea ho sebetsana le thepa.Ka sebopeho sa eona se ikhethang le melemo ea ho phahamisa le ho tsamaisa thepa, crane ena e bapala karolo ea bohlokoa liindastering tse fapaneng.Mohlala ona o khetholloa ka sebopeho sa ona se bonolo empa se le matla.E na le girder e le 'ngoe e tsamaeang ka holimo ho siling ea setsi.Hangata girder ena e entsoe ka tšepe ea boleng bo phahameng, e netefatsang matla le ho tšoarella ha eona.Crane e tšehetsoa kemaballo a ho qetelali-taat li na le mabili, a lumellang crane ho tsamaea tseleng ea sefofane.
E 'ngoe ea melemo e hlahelletseng ea crane ea girder overhead ea motlakase ke ts'ebeliso ea eona e nepahetseng ea sebaka.Ka ho emisa crane ho tloha siling, e felisa tlhokahalo ea litšehetso kapa litšiea tsa fatše.Moralo ona o lumella sebaka se eketsehileng sa fatše hore se sebelisoe hantle, se nolofalletsang ts'ebetso e bonolo le ho eketsa tlhahiso ea setsi ka kakaretso.
Molemo o mong oa crane ea girder overhead ea motlakase e le 'ngoe ke ho feto-fetoha ha eona ho sebetsanang le mefuta e mengata ea thepa.E ka ba le lisebelisoa tse fapaneng tsa ho phahamisa, joalo ka lihakisi, li-grabs, kapa limakete, ho amohela mefuta e fapaneng ea meroalo.Ebang ke maballo a tšepe, likarolo tsa mochini, kapa lisebelisoa tse ngata, ho ikamahanya le maemo ha crane ho etsa hore e tšoanelehe bakeng sa lits'ebetso tse fapaneng tsa ho sebetsana le lisebelisoa.
Ho feta moo, crane ea girder e le 'ngoe ea motlakase e fana ka metsamao e nepahetseng le e boreleli.Enjene ea eona ea motlakase le sistimi ea taolo e lumella basebelisi ho laola ho phahamisa, ho theola le ho tsamaea ka nepo.Ts'ebetso ena e nepahetseng e fokotsa kotsi ea tšenyo ea thepa le ho netefatsa polokeho ea basebelisi le tikoloho e haufi.
litekanyetso tsa tekheniki
| paramethara ea single girder holim'a crane | |||||||
|---|---|---|---|---|---|---|---|
| ntho | unit | sephetho | |||||
| bokgoni ba ho phahamisa | ton | 1-30 | |||||
| boemo ba ho sebetsa | A3-A5 | ||||||
| span | m | 7.5-31.5m | |||||
| Mocheso oa tikoloho ea ho sebetsa | °C | - 25-40 | |||||
| lebelo la ho sebetsa | m/m | 20-75 | |||||
| ho phahamisa lebelo | m/m | 8/0.8(7/0.7) 3.5(3.5/0.35) 8(7) | |||||
| bophahamo ba ho phahamisa | m | 6 9 12 18 24 30 | |||||
| lebelo la ho tsamaya | m/m | 20 30 | |||||
| mohloli oa matla | mekhahlelo e meraro 380V 50HZ | ||||||
lintlha tsa sehlahisoa
Qetella Beam
T1.E sebelisa mochini oa tlhahiso ea li-rectangular tube 2.Buffer motor drive 3.Ka li-roller bearings le iubncation ea ka ho sa feleng
Beam e ka sehloohong
1.Ka mofuta o matla oa lebokose le camber e tloaelehileng ea 2. Ho tla ba le poleiti e matlafatsang ka har'a girder e kholo.
Crane Hoist
1.Pendent & remote control 2.Capacity:3.2-32t 3.Bolelele: max 100m
Crane Hook
1.Pulley Diameter:125/0160/0209/0304 2.Material:Hook 35CrMo 3.Tonnage:3.2-32t
Mosebetsi o Motle
Tlase
Lerata
Hantle
Mosebetsi oa matsoho
Letheba
Morekisi
E kgabane
Lintho tse bonahalang
Boleng
Tiisetso
Ka mor'a Thekiso
Tshebeletso
Kopo
E SEBELISA MAHALA A MANGATA
Khotsofatsa khetho ea basebelisi tlasa maemo a fapaneng.
Tšebeliso: e sebelisoang lifekthering, polokelong, thepa ea thepa ho phahamisa thepa, ho kopana le mosebetsi oa letsatsi le letsatsi oa ho phahamisa.
Seboka sa Tlhahiso
Sebaka sa polokelo
Store Workshop
Plastic Mold Workshop
sepalangoang
- nako ea ho paka le ho pepa
- re na le sistimi e felletseng ea ts'ireletso ea tlhahiso le basebetsi ba nang le boiphihlelo ho netefatsa ho fana ka nako kapa kapele.
-
lipatlisiso le nts'etsopele
- matla a seporofeshenale
-
letšoao
- matla a feme.
-
tlhahiso
- lilemo tsa boiphihlelo.
-
tloaelo
- letheba le lekane.
-
asia
- 10-15 matsatsi
-
bochabela bohareng
- 15-25 matsatsi
-
Afrika
- 30-40 matsatsi
-
Europe
- 30-40 matsatsi
-
Amerika
- 30-35 matsatsi
Ka seteishene sa naha se romellang lebokose le tloaelehileng la plywood, palletor ea lepolanka ka har'a setshelo sa 20ft & 40ft.Kapa ho ea ka litlhoko tsa hau.
